Query returned 10429 results.

Task Design and Task Analysis for Empirical Studies into Design Activity

Bender, B.; Kammerer, U.; Pietzcker, F.; Blessing, L. T. M.; Hacker, W. // 2002
In many laboratory studies, design activity has been investigated by observing individual designers or design teams dealing with standardised design tasks. The results are valuable for a better ...

Terms and Measures for Styling Properties

Podehl, G. // 2002
The integration of styling work into the overall product development process is still not sufficiently achieved. Engineering and styling use different concepts and terminologies. Both areas are ...

The application of 3d-digitalization for the developmentof medical instruments

Schwarz, R.; Kluge, R. // 2002
This paper gives a specific example of a new medical instrument that utilizes 3d-digitalization and rapid prototyping in its development. The basis for this development was to compliment a new tooth ...

The Application of Design Management Theory to a Real Design Projects

Hollins, B. // 2002
It is proposed that the theoretical models of design management have now moved from being too shallow to being too complex. As a result, they are not being used. Furthermore, they do not include an ...

The Application of the ECODESIGN PILOT and Methodical Support for the Implementation of ECODESIGN in Products

Wimmer, W.; Züst, R.; Strasser Ch. // 2002
The question nowadays is how to bring environmental information to engineers in product development in order to support the decision making towards more environmentally conscious products. The paper ...

The Artificial Intelligence Application to the Analysis of the Constructive and Working Parameters of Plane Mechanism

Sprecic, Denijal; Muftic, Osman; Janežic, Igor; Mujic, Elvedin // 2002
A computer based analysis method of a plane lever mechanism is described in this paper. Software, based upon conventional methods of analysing plane lever mechanisms, is developed for a concrete ...

The Creation of a Knowledge Sharing Culture for Effective Knowledge Management

Hallam, J.; Hodges, B.; Tabeshfar, K.; Velay, X. // 2002
This paper is based on research carried out as part of a workpackage concerned with change management in the 'Experts Enablers in the Machine Engineering Domain (XPERTS)' project. XPERTS ...

The Electronic Control Ignition and Fuel Injection System for Formula Student Racer Engine

Kegl, B.; Pehan, S. // 2002
In this paper some aspects of the Formula S project, team and racing car is briefly presented. Attention is focused on the air and fuel supply of engine. The intake manifold is planed from the ...

The Eraser Pen: A New Interaction Paradigm for Curve Sketching in 3D

De Amicis, R.; Bruno, F.; Stork, A.; Luchi, M. L. // 2002
In this paper we present a new interaction technique for curve sketching in 3D which integrates the two tasks of creating and editing into one paradigm: the 3D-eraser pen. The eraser pen allows ...

The Evaluation of Costs Related to Safety of Mechanical Systems in Design Stages

Fargnoli, M.; Pighini, U. // 2002
Cost is a factor having a great influence on the properties of any Mechanical System, limiting in a significant way designers’ and manufacturers’ choices, who are always limited in their choices. It ...

The Guideline "Design for Upgrading" as a Medium for Sustainable Design

Lindemann, U.; Mörtl, M.; Hessling, T.; Hutterer, P. // 2002
This paper is about the topic to prolong the service life of capital goods - with a special focus to Upgrading. The processes occurring during the generation of a product should be systematically ...

The Impact of CAD Technologies on Engineer's Education

Galeta, T.; Kljajin, M.; Majdandžic, N. // 2002
Main goal in an education of mechanical engineer is to deliver ready master to enterprises, prepared to deal with increased use of computer technologies. One of very basic technology that engineer ...

The Importance of Corporate Culture in Collaborative Product Design

Marxt, C. // 2002
Due to the increasing complexity of technologies and products, the search for new know-how as well as the shortening of development cycle times a lot of companies collaborate in (new) product design. ...

The Influences of Organisation on Leadership in the Design Process: Results of an Investigation in Five Industrial Companies

Lüdcke, R.; Birkhofer, H. // 2002
The concept of leadership is closely bonded with the concept of organization: one defines and influences the other. The consequences and situations in which these problems arise are shown in this ...

The Innovation-Styling Spectrum: Factors Constraining the Design Ambition of UK SMEs

Moultrie, J.; Fraser, P.; Clarkson, P. J. // 2002
This paper describes the development of a framework depicting a spectrum of approaches to managing industrial design. This framework is based on literature and case examples, and four representative ...

The Role of the Designer in the Innovation Process: Experience of a Large Supermarket Chain

Tacla, I.; Divry, C.; Sainz, C.; Magnon, L. // 2002
This paper concerns the design of new checkouts for an SA group of a supermarket chain. The goal of this research was to extend the approach to the general situation of payment and not just to ...

The Significance of Contact Pressure Distribution on the Soft Tissue by Men Sitting

Ergic, T.; Ivandic, Ž.; Kozak, D. // 2002
A lot of investigations today are devoted to make the people life better from the ergonomic point of view. Here the magnitude and distribution of pressure by men sitting is very often the topic of ...

Theoretical Improvement of the Planetary Gear Dynamic Model

Geramitcioski, T.; Trajcevski, Lj. // 2002
The major goal in this work is to improve the planetary gear dynamic model presented in the diseration by Jian Lin presented in the Ohio State University in 2000 . A lumped-parameter model is built ...

Three-Dimensional Modelling of Solid-Fluid Interaction as a Design Tool in Screw Compressors

Kovacevic, Ahmed; Stošic, Nikola; Smith, Ian K. // 2002
In order to reduce internal leakage in screw compressors, efforts are continually being made to produce them with smaller clearances. However, since their rotors deform due to the high pressure loads ...

Tolerance Design of the Journal-Bearing Kinematic Joint. Numerical Analysis of the Effect of the Shape Variations on the Performances

Di Gironimo, G.; Lanzotti, A.; Patalano, S.; Russo, R. // 2002
In this work the authors deal with the problem regarding tolerance design of the journal – bearing kinematic joint, in which hydrodynamic lubrication conditions are realised. In particular, they ...

Towards 'Virtual Clay' Modelling - Challenges and Recommendations: A Brief Summary of the Literature

Sener, B.; Wormald, P.; Campbell, I. // 2002
Over the last decade, the industrial designer's workplace has been changed by CAID tools. The design form could evolve in steps alternating between development with traditional tools and with ...

Boolean Searches

The following examples demonstrate some search strings that use boolean operators:

  • design community
    Find rows that contain at least one of the two words.
  • +design +community
    Find rows that contain both words.
  • +design community
    Find rows that contain the word “design”, but rank rows higher if they also contain “community”.
  • +design -community
    Find rows that contain the word “design” but not “community”.
  • +design ~community
    Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not.
  • +design +(>community <decisions)
    Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions”
  • design*
    Find rows that contain words such as “design”, “designs”, “designing”, or “designer”.
  • "some words"
    Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.

Please sign in to your account

This site uses cookies and other tracking technologies to assist with navigation and your ability to provide feedback, analyse your use of our products and services, assist with our promotional and marketing efforts, and provide content from third parties. Privacy Policy.