Query returned 11238 results.
A Case Study Exploring the Role of Design in Maturing University-Developed Technology
David Mesa, Linus Tan, Charlie Ranscombe // 2022
Universities struggle to commercialise scientific research. However, designers can help scientists bridge the research-market gap in different ways. Although the value design can bring to science is ...
A Classification Method for the Systematic Identification of Models and Workflows in MBSE
Gregor Hoepfner (1), Julia Kowalski (2), Clemens Faustmann (3), Thilo Zerwas (1), Philipp Kranabitl (3), Seyedmohammad Vafaei (1), Georg Jacobs (1), Hannes Hick (3) // 2022
Modern engineering uses models for virtual verification of systems. Such models are usually combined in workflows, where the results of models are linked to verify system requirements. Model-Based ...
A COLLABORATIVE APPROACH TO DIGITAL STORYTELLING IN HEALTHCARE SETTINGS
Behnam Asl, Sana (1); Gill, Carolina (1); Umstead, Kelly (1); Mahtani, Raunak (1); Tully, Kristin (2) // 2022
A Comparative Analysis of the Engineering Design and Lean Start-Up Innovation Methodologies
Deval Karia (1), Komal Shah (1), Kavyashree Venkatesh (1), Shakuntala Acharya (2), Manish Arora (1) // 2022
Innovation is a key driver for product success. Engineering design and lean start-up are prominent innovation methodologies well accepted and widely used. There is a lack of availability of pragmatic ...
A concept for a novel hybrid augmented reality computer workstation for virtual product development
Jakob Harlan, Benjamin Schleich, Sandro Wartzack // 2022
Extended reality user interfaces for engineering design often suffer from gaps in the user’s workflow. Usually, the user must at least put on hardware, but often also data preparation is needed. This ...
A Designers' Perspective on Additive Manufactured Smart Wearables for Paediatric Habilitation
Matthew Bonello, Philip Farrugia // 2022
The aim of the paper is to identify from the perspective of designers, what is required to optimally design smart habilitation devices for additive manufacturing, whilst ensuring a high quality ...
A DIDACTIC LOOK ON THE INTRODUCTION OF E PORTFOLIOS IN A PRODUCT DESIGN COURSE
Tyroller, Maria; Walter, Michael S. J.; Kaetzel, Charlotte; Riess, Christian // 2022
A Digital Twin Trust Framework for Industrial Application
Jakob Trauer (1), Sebastian Schweigert-Recksiek (1), Tim Schenk (2), Thomas Baudisch (2), Markus M // 2022
A reason for the slow adoption of digital twins in industry is a lack of trust in the concept and between the stakeholders involved. This paper presents a Trust Framework for Digital Twins based on a ...
A Framework to Collect and Reuse Engineering Knowledge in the Context of Design for Additive Manufacturing
Giovanni Formentini (1), Claudio Favi (1), Marco Mandolini (2), Michele Germani (2) // 2022
Design for AM (DfAM) requires the definition of Design Actions (DAs) to optimize AM manufacturing processes. However, AM understanding is still very blurred. Often designers are challenged by ...
A Life-Cycle Framework to Manage Collaboration and Knowledge Exchange in Open Organisations
Matthias R. Guertler (1), Nico Adams (2), Glenda Caldwell (3), Jared Donovan (3), Andreas Hopf (1), Jonathan Roberts (3) // 2022
Successful research and development requires interdisciplinary collaboration, often across organisational boundaries and for extended timeframes, such as in innovation networks or ecosystems. Open ...
A Longitudinal Study of Teamwork Quality in Design Teams
Harshika Singh (1), Nikola Horvat (2), Stanko Škec (2), Niccolò Becattini (1) // 2022
Teamwork quality (TWQ) is often associated with project success. Therefore, understanding TWQ is crucial to have better design project outcomes. Since most of the studies in the past have presented a ...
A Machine Learning-Based Approach for Quick Evaluation of Live Simulations in Embodiment Design
Christopher Sauer (1), Benjamin Gersch // 2022
Supporting product developers in early design phases with Live-Simulation can enhance the quality of early product designs. Live-Simulation can also facilitate a democratization of simulation and ...
A Matrix-based Flexible Multi-level Project Planning Library and Indicators
Kosztyán, Zsolt Tibor (1); Gergely, Novák (1,2); Róbert, Jakab (1,3); Hegedűs, Csaba (1) // 2022
Flexible approaches such as agile, hybrid, and extreme project management from the software project environment are increasingly used in nonsoftware environments. Nevertheless, only a few methods and ...
A Method for Additive Tooling in Integrated Product Development
Schrock, Steffen; Junk, Stefan; Albers, Albert // 2022
This paper presents a method for supporting the application of Additive Tooling (AT)-based validation environments in integrated product development. Based on a case study, relevant process steps, ...
A Method for the Support of the Design for Digital Twin Solution and Its Application on a Gearbox System
Yanik Koch (1), Stephan Husung (2), Felix R // 2022
The information from Real Twins are increasingly used to construct Digital Twins. Acquisition of information from the Real Twin or in other words performing measurements on the Real Twin may lead to ...
A model for implementing the service-learning method through collaboration with three institutions: the university, the science park, and community enterprise
Tanaiutchawoot, Narucha // 2022
The service-learning method is a high-impact technique for students in which learning happens via service and reflection on real-world objectives. However, this technique must overcome several ...
A model-based approach for early robustness evaluation – Combination of Contact and Channel Approach with tolerance graphs in SysML
Dennis Horber (1), Jiahang Li (2), Patric Grauberger (2), Benjamin Schleich (1), Sven Matthiesen (2), Sandro Wartzack (1) // 2022
Considering variations is essential for the development of robust products, but the applicability of existing robust design approaches in early stages is challenging due to the lack of product ...
A Modelling Method for Describing and Facilitating the Reuse of SysML Models during Design Process
Atif Mahboob, Stephan Husung // 2022
MBSE and SysML are increasingly finding their applications in industry as well as in academia. The reuse of the information described in SysML models depends, among others, on the modelling methods, ...
A Musculoskeletal Human Model-Based Approach for Evaluating Support Concepts of Exoskeletons for Selected Use Cases
Carla Molz (1), Zhejun Yao (2), Johannes S // 2022
This paper presents an approach for evaluating exoskeleton support concepts through biomechanical analyses on a musculoskeletal human model. By simplifying the support forces of an exoskeleton as ...
A New Projection Based Method for the Classification of Mechanical Components Using Convolutional Neural Networks
Sebastian Bickel, Benjamin Schleich, Sandro Wartzack // 2022
Digital engineering is increasingly established in the industrial routine. Especially the application of machine learning on geometry data is a growing research issue. Driven by this, the paper ...
A Novel User-Centred Framework for the Holistic Design of Therapeutic Medical Devices
Edward Abela, Philip Farrugia, Maria Victoria Gauci, Pierre Vella, Glenn Cassar, Emanuel Balzan // 2022
Numerous and complex sequence of activities in medical device development often result in time consuming and expensive engineering processes. In this study, patient and designer requirements were ...
A PAN-EUROPEAN TRANSFORMATION TO BRIDGE THE GAP BETWEEN TANGIBLE EXPERIENCE AND VIRTUAL IDEATING SPACES
Wachs, Marina-Elena (1); Scholl, Theresa-Marie (2); D'Aleo, Giulia (3) // 2022
A Procedure Model for the Systematic Sensor Selection and Integration into Technical Systems
Maximilian Hausmann, Luca H // 2022
New sensor solutions are under development in the context of digitalization in order to integrate sensory functions into systems. When integrating sensors, the three domains of mechanical, electrical ...
A Process Modelling Morphology to Support Process Analysis and Development in Change Processes
Theresa Ammersd // 2022
Process modelling (PM) is used to support designers by providing guidance on what needs to be done. Change processes in development organizations accompany introduction of new procedures, new methods ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.