Query returned 11501 results.
Advanced innovation design approach for process engineering
Casner, Didier; Livotov, Pavel // 2017
Process engineering focuses on the design, operation, control and optimization of chemical, physical and biological processes and has applications in many industries. Process Intensification is the ...
ADVANCING COMMUNITY DESIGN EDUCATION
Borhani, Alireza; Kalantar, Negar // 2017
In architecture, the main pedagogical challenge lies in the gap between what is and what should be taught in design studios. What is appropriate material for inspiring fledgling architects to move ...
Agile development and the constraints of physicality: A network theory-based cause-and-effect analysis
Schmidt, Tobias Sebastian; Chahin, Abdo; Kößler, Johannes; Paetzold, Kristin // 2017
Not only software development, but also many companies developing physical products (not purely software) face high uncertainties and dynamics which raises the need for agile practices well-proven in ...
ALIGNING ASSESSMENT RESULTS WITH LEARNING OUTCOMES
VOß, Markus; BOZKURT, Hulusi; SAUER, Thorsten // 2017
Competence-based education concentrates on learning outcomes instead of meticulously prescribing what to learn. A major problem for many lecturers and programme directors today is the lack of ...
An approach for holistic model-based engineering of industrial plants
Hooshmand, Yousef; Adamenko, Dmytro; Kunnen, Steffen; Köhler, Peter // 2017
Systems Engineering has been proven to be an effective approach to cope with the increasing complexity of systems, consisting of mechanical, electrical, electronic and software components. However, ...
An approach to analyse the potential of tailored forming by TRIZ Reverse
Brockmöller, Tim; Mozgova, Iryna; Lachmayer, Roland // 2017
Within the “Collaborative Research Centre” 1153 a new technology called Tailored Forming (TF) is developed. With TF load adapted hybrid high performance components which consist of two different ...
An approach to handle uncertainty during the process of product modelling
Würtenberger, Jan; Lotz, Julian; Freund, Tillmann; Kirchner, Eckhard // 2017
Product models are the results of product modelling and are used for decision making during the development process. They are based on assumptions by the designer, which are made under a lack of ...
An approach to implement design for additive manufacturing in engineering studies
Lippert, Bastian; Leuteritz, Georg; Lachmayer, Roland // 2017
This paper describes an approach to implement additive manufacturing technologies in engineering studies by analyzing a lecture, which is divided into a theoretical and a practical part. Focusing on ...
An assembly-oriented product design methodology to develop similar assembly operations in a mixed-product assembly line
Asadi, Narges; Jackson, Mats; Augustsson, Per; Fundin, Anders // 2017
With the growing demands for product variety, Mixed-Product Assembly Lines (MPALs) as an effective means of creating product variety are recently increasing in manufacturing companies. However, ...
An automated generation method of system architecture with component's multi-criterion evaluation
Chen, Ruirui; Liu, Yusheng; Liu, Ying; Zhang, Zhinan; Ye, Xiaoping; Hu, Jie // 2017
System architecture is important for the design of complex mechatronic systems since it acts as a connection between conceptual design and detail design. An efficient automatic system architecture ...
An eco-innovation method for products in Bottom of the Pyramid (BoP)
Chen, Jahau Lewis; Chung, Shih-Hou // 2017
This paper presents an innovation method for Bottom of the Pyramid (BoP) by integrating BoP case database and TRIZ techniques. This method can help the designer to go through the design processes to ...
An educational method for enhancing the ability to design innovative products
Yamada, Kaori; Tsumaya, Akira; Taura, Toshiharu; Shimada, Kenji; Kaihara, Toshiya; Yokokohji, Yasuyoshi; Sato, Ryuta // 2017
In the modern era, what we produce is important, and synthetic design thinking is strongly needed to create innovative products that bring qualitative changes to users’ lifestyles. This paper ...
An empirical survey on efficiency improvement for the collaboration between design and simulation departments
Schweigert, Sebastian; Xia, Minghai; Lindemann, Udo // 2017
Efficient collaboration between design and simulation departments is a challenge in many industries. Under the cost and time pressure of product development, CAD/CAE integration has become ...
An end of life oriented framework to support the transition toward circular economy
Marconi, Marco; Germani, Michele // 2017
Circular economy is recognized as the most effective economic model to face issues related to waste management and resource scarcity. This requires to efficiently manage the End of Life (EoL) phase, ...
An engineering approach to mapping meanings in products and services
Waltersdorfer, Gregor; Gericke, Kilian; Desmet, Pieter; Blessing, Lucienne // 2017
The aim of this paper is to explore how meanings in products and services can be captured, deconstructed, and finally structured, in order to facilitate the deliberate and intentional creation and ...
An exploration of company personas to support customized DfS implementation
Ali, Faheem; Boks, Casper; Bey, Niki // 2017
The increasing discussion on DfS implementation in companies has shifted the focus to effectiveness of the implementation process. Literature shows that there are certain barriers and challenges that ...
An exploration of design synthesis
McTeague, Chris; Duffy, Alex; Campbell, Gerard; Grealy, Madeleine; Hay, Laura; Pidgeon, Laura; Vuletic, Tijana // 2017
Building on the contributions of existing works in the area of design ontology, this paper presents a hypothetical model of design synthesis which depicts design activities, design outputs and two ...
An exploratory study into the impact of new digital design and manufacturing tools on the design process
Corsini, Lucia; Moultrie, James // 2017
The study aims to understand the impact of new digital design and manufacturing tools on the design process. Digital manufacturing technologies are having far reaching impacts on design, however ...
An exploratory study to integrate feasibility into the eco-design process: An approach to link design and environmental parameters
Bratec, Florian; Matta, Nada; Reyes, Tatiana; Troussier, Nadčge; Diaz Pichardo, René; Voinot, Thibaut; Jouanne, Guillaume // 2017
To support environmental practices in industrial design, many software tools have been developed. These tools aim to provide environmental information in a decision context for designers and ...
An information model to estimate efforts of product development processes
Dittmann, Claudia; Jacobs, Georg; Felix, Valerie // 2017
Due to small batch series or customer orders with specific requirements, costs and especially development cost are hard to determine. Their impact on the overall costs is enormous and cannot be ...
An objective methodology for blind spot analysis of HGVs using a DHM approach
Marshall, Russell; Summerskill, Stephen // 2017
This paper presents research into the quantification and evaluation of driver's field of view (FOV) from Heavy Goods Vehicles (HGVs). The research explores the nature of any blind spots to drivers' ...
An optimization-based approach for supporting early product architecture decisions
Raja, Visakha; Isaksson, Ola; Kokkolaras, Michael // 2017
An important aspect in designing the product architecture of turbo fan engine structural components is the load path and flow path of the components. We present an approach for deciding the ...
Analyse der Daten- und Informationsflüsse im Produktentstehungsprozess eines OEMs (Members only )
Julian, Schönwald; Julian, Fleskes; Christian, Forsteneichner; Kristin, Paetzold // 2017
In order to be competitive, companies need a high standard of product quality. To maintain this standard, verification and validation procedures need to be applied constantly during the Product ...
ANALYSIS AND TRANSFORMATION OF WORKS IN DESIGN
Thomsen, Bente Dahl // 2017
Based on analyses of architectural works, design engineer students are introduced to interpretation of well-known designers’ works with the aim of giving them a starting point for discussing ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.