Query returned 11501 results.
BEHAVIOURS, PRACTICES, ACTIVITIES, DOINGS: MAKING THEM SUSTAINABLE THROUGH DESIGN
Chu, Wanjun (1); Wever, Renee (2) // 2022
Best Practices of Team-Building Activities in a Project-Based Learning Class 'Design Project' in a Japanese Graduate School
Mayu Akaki (1,2), Makoto Ioki (1), Keita Mitomi (1,2), Takashi Maeno (1) // 2022
To indicate the effective team-building activities implemented independently by the students in a project-based learning class in higher education in Japan, we conducted semi-structured interviews ...
Biomaterials in Everyday Design: Understanding Perceptions of Designers and Non-Designers
Nurul 'Ayn Ahmad Sayuti (1,2), Bjorn Sommer (2), Saeema Ahmed-Kristensen (3) // 2022
The application of biological materials in everyday design is gaining traction and designers are encouraged to employ biological systems through biodesign and biophilia. However, there is a ...
Bottom-up Component Rationalisation using a Dynamic Sharing Matrix
Jacobsen, Nicolaj Rolskov; Mortensen, Niels Henrik // 2022
This paper addresses the challenge of managing the complexity in product development and the supply chain in a company with highly customised products. This is done by proposing a tool to reduce the ...
Capturing the Design Rationale in Model-Based Systems Engineering of Geo-Stations
Andreas Zech (1), Ralf Stetter (2), Stephan Rudolph (3), Markus Till (2) // 2022
The design rationale describes the justification of design decision or selection. To avoid unnecessary design iterations, a capturing and documentation of this rationale is highly desirable. In ...
Cardinal Maturity Determination of Technology Development: Medical Device Development Case Study
Soumya Ranjan Mishra, Kamran Behdinan // 2022
A novel application of Best Worst Method (BWM) enables one to incorporate the complexity of specific sub-criteria of technological development to assess its maturity with the pre-established ...
Challenges and Opportunities for Enabling Mutual Learning and Collaboration in Design and Innovation for Sustainable Development in Africa and Beyond
Susanne Nilsson (1), Bernard Shibwabo Kasamani (2), Julia Hede Mortensen (1), Dunja Stevanovic (3), Michelle Wanyang (2), Margareta Norell Bergendahl (1), Panos Y. Papalambros (4) // 2022
Global collaboration and mutual learning in design are put forth as means to address the UN SDGs. This paper draws upon experiences in the Design Society’s AFRICA-DESIGN initiative to build a network ...
Challenges and Opportunities in Remote Prototyping: A Case-Study during COVID-19
Nuno Miguel Martins Pacheco (1), Anand Vazhapilli Sureshbabu (1), Elena Dieckmann (2), Maria Apud Bell (2), Stephen Green (2), Peter Childs (2), Markus Zimmermann (1) // 2022
Collaboration is common practice within design disciplines and beyond. Brainstorming, discussions, and prototyping tend to occur within the same physical space. The reduction of human interaction ...
Challenges for the Consideration of Ergonomics in Product Development in the Swedish Automotive Industry – An Interview Study
Estela Perez Luque, Erik Brolin, Dan H // 2022
This paper presents an interview study aiming to understand the state of the art of how ergonomics designers work in the vehicle development process within the Swedish automotive industry. Ten ...
Challenges Of Big-science: A Matrix-based Interface Model To Manage Technical Integration Risks In Multi-organizational Engineering Projects
Beernaert, Torben (1); Etman, Pascal (2); De Bock, Maarten (3); De Baar, Marco (1); Classen, Ivo (1) // 2022
Tomorrow’s big science systems are in development today. Success depends on global collaboration in which multiple international parties produce unique assemblies. Inter-organizational barriers, ...
Challenges, Potentials and Success Factors in Automotive HMI Concept Development in the Early Phase in the Model of PGE – Product Generation Engineering
Hünemeyer, Sebastian; Reichelt, Florian; Rapp, Simon; Albers, Albert; Maier, Thomas // 2022
A distinctive UX shaping the brand is an important goal in the development of a new product generation. Trends such as advancing digitalization open up many innovation potentials for UX developers. ...
Closed-Loop Engineering Approach for Data-Driven Product Planning
Thomas Dickopf, Christo Apostolov // 2022
This contribution introduces an approach for data-driven optimization of products and their product generations through a Closed-Loop Engineering approach resulting from the German research project ...
Closing the Loop Valorization of Industrial Waste of Composite Materials through Re-Design of Products from Detached Value Chains
Federica Cappelletti, Marta Rossi, Michele Germani // 2022
The literature lacks methodologies to make supply chains of composite materials circular. The proposed approach aims to transform scraps and off-specification products into secondary raw materials. ...
Co-Designing with AI in Sight
// 2022
Artificial Intelligence offers a wide variety of capabilities that can potentially address people's needs and desires in their specific contexts. This pilot study presents a collaborative method ...
COLLABORATIVE LEARNING IN INTERNATIONAL INTERDISCIPLINARY TEAMS
Petrova, Miroslava Nadkova (1); Geldres Piumatti, Ricardo (2); Canseco Castro De Steffen, Milagros Diez (2); Lucho Lingán, César Rubén (2) // 2022
Collaborative Modeling of Use Case & Damage Scenarios in Online Workshops Using a 3D Environment
Sergej Japs (1), Sebastian Schmidt (1), Frank Kargl (2), Lydia Kaiser (3), Aschot Kharatyan (1), Roman Dumitrescu (4) // 2022
The development of technical systems requires close cooperation of stakeholders from different disciplines. This collaboration takes place in workshops. Driven by digitalization and by the current ...
Combined environments - challenges and potentials in the realistic component testing
Philipp Hüttich, Stefan Panek, Dieter Krause // 2022
Structural components can be exposed to extreme environmental conditions during operation over their service life. For this reason, they have to pass corresponding tests during development and ...
Comparing EEG Brain Power of Mechanical Engineers in 3D CAD Modelling from 2D and 3D Representations
Fanika Lukačević (1,2), Shumin Li (2), Niccolò Becattini (2), Stanko Škec (1) // 2022
Using the EEG features extracted from the EEG signals, the presented study investigates differences in the cognitive load posed on engineers while 3D CAD modelling in two different conditions, ...
Comparing the quality of documentation used in production equipment acquisitions and the impact on the performance of the acquired equipment – a pre study
Hagström, Malin Hane; Bergsjö, Dag; Furborg, Fredric; Aas, Rickard // 2022
There are often problems with design documentation, such as incomplete or missing and quality of input. A pre study within an engineering department for advanced machinery investigates the quality of ...
Compounding Composites from Raw Materials with Extrusion Directly on 3D Printer
Oscar Rundbäck Martinsson, Axel Nordin, Jože Tavčar // 2022
The materials most commonly used in 3D-printers are in a filament form. This is a barrier for users who want to have new types of filaments with different material compositions. A 3D-printer which ...
Computational Design of an Additively Manufactured Origami-Based Hand Orthosis
Melanie Oliveira Barros, Andreas Walker, Tino Stanković // 2022
This work investigates the application of origami as the underlying principle to realize a novel 3D printed hand orthosis design. Due to the special property of some origami to become rigid when ...
COMPUTATIONAL DESIGN, ADVANCED VISUALISATION, AND THE CHANGING NATURE OF CAD
Urquhart, Lewis; Petrakis, Konstantinos; Wodehouse, Andrew // 2022
Computer Aided Ergonomics: Evaluation Study of a Interaction Model for Digital Human Models
Alexander Wolf, Konrad Fackler, Magnus Reulbach, Sandro Wartzack, J // 2022
In user-centred design, digital human models hold the potential for proactive evaluations of ergonomics or discomfort in terms of a computer aided ergonomics tool. Therefore, models predicting human ...
Concept of a Multi-Agent System for Optimised and Automated Engineering Change Implementation
Ognjen Radisic-Aberger, Tim Weisser, Till Sassmannshausen, Johannes Wagner, Peter Burggr // 2022
Engineering changes are necessary to stay competitive, unavoidable and occur more frequently with increased product complexity. Currently, scheduling of engineering changes into production and supply ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.