Query returned 11501 results.
CAN CHANGE PREDICTION HELP PRIORITISE REDESIGN WORK IN FUTURE ENGINEERING SYSTEMS?
Wynn, D. C.; Caldwell, N. H. M.; Clarkson, P. J. // 2010
As a result of easier and faster iterations during the design process, the management of design changes, their propagation and their impacts are likely to become increasingly important in future. ...
Can the use of an I-Pod improve the learning and teaching process for design students
Forkes, Andrew D // 2010
With the adoption of virtual learning environments (VLE) such as Blackboard, the ability for students to capture content from lectures for reviewing has been improved, however, with the advent ...
Challenges in Conceptual Design of Fencing Systems, Students View
Kovacevic, Ahmed; Halai,Ashwin; Ghazihesami, Rouzbeh; Verdegver ,Javier; Gowree ,Erwin Ricky; Jeshani, Snehal; Valtera, Jan // 2010
A systematic engineering design process is recommended for use in industry. Still many design teams tend not to follow it and consequently their designs are not adapted to a customer needs. Even when ...
Changeability: Unfolding a Method for Learning and Designing in a Fast Paced Market
Ovesen, Nis // 2010
This paper addresses the discussion about how designers and design educations should consider the challenges of increasingly faster and unpredictably changing markets. By looking into the domains of ...
Changing Personal Memories to Group Memories: Study of a Workshop on the Expression of Personal Memories
Nagai, Yumiko; Nojima, Hisao; Sunaga, Takeshi // 2010
We have held workshops on the expression of personal memory since 2006. The purpose of the current study is to investigate a workshop on the expression of personal memory. These expressions ...
CHARACTERISING THE IMPACT OF LEGACY ARCHITECTURES ON COMPLEX PRODUCTS
Wyatt, D. F.; Wynn, D. C.; Clarkson, P. J. // 2010
The architecture of a product is important for its lifecycle performance, but incremental design is often practised to limit the duration, costs and risks of product development. Using computational ...
CLASSIFICATION AND SYNTHESIS OF DESIGN THEORIES
Geis, C.; Birkhofer, H. // 2010
Models and methodologies for designing are numerous nowadays and no holistic approach, which combines all models, exists so far. Nonetheless, all of these models were developed with specific ...
Classification of Customisation Means for Product
Petersen, Thomas Ditlev; Nielsen, Kjeld; Jørgensen, Kaj A. // 2010
Customising products efficiently by means of development and manufacturing costs as well as attractiveness to the customer is essential in a mass customisation strategy. This paper aims at providing ...
COGNITIVE HEURISTICS IN DESIGN IDEATION
Yilmaz, S.; Seifert, C. M. // 2010
This paper explores the use of design heuristics as cognitive strategies in the creation of innovative products. Design heuristics are guidelines that help the designer to consider areas of possible ...
COGNITIVE PRODUCTS: DEFINITION AND FRAMEWORK
Metzler, T.; Shea, K. // 2010
Cognitive products offer great potential to satisfy new user needs and desires through cognitive capabilities. This paper provides a review of related product types, e.g. mechatronic and ...
COLLABORATION BETWEEN DESIGNERS AND SCIENTISTS IN THE CONTEXT OF SCIENTIFIC RESEARCH: A LITERATURE REVIEW
Peralta, C.; Moultrie, J. // 2010
This paper examines literature about collaboration between product/industrial designers and scientists in scientific research. The paper suggests that differences between design and science are ...
COLLABORATIVE ACTIVE ROOF DESIGN
Quanjel, E.; Zeiler, W. // 2010
Roofs play an essential role in buildings however the development of innovative more sustainable active roofs is difficult. In the Dutch Building Industry sub optimal use of knowledge by participant ...
COLLABORATIVE ENGINEERING – ISSUES AND EVIDENCE FROM INDUSTRIAL PRACTICE
Stoeckert, H.; Lindow, K.; Stark, R. // 2010
A lot of challenges needs to be managed when it comes to Collaborative Engineering in today’s product developing industries. This paper describes investigations in the field of Collaborative ...
Combination of Two Ways to Consider Design Iterations: Product and Development Process Oriented View
Krehmer, Hartmut; Westphal, Christoph; Harald, Meerkamm; Wartzack, Sandro // 2010
Aim of this contribution is to introduce a framework for an improved understanding of design iterations, which allows considering design iterations as being related to the product as well as to the ...
COMBINING PROCESS MODEL AND SEMANTIC WIKI
Albers, A.; Ebel, B.; Sauter, C. // 2010
Increasing product complexity, gobal markets and shorter product life cycles are only a few reasons why the development of new products is a challenging task. A lot of knowledge is needed for and ...
COMBINING STRUCTURAL COMPLEXITY MANAGEMENT AND HYBRID DYNAMICAL SYSTEM MODELLING
Diepold, K. J.; Biedermann, W.; Eben, K. G. M.; Kortler, S.; Lohmann, B.; Lindemann, U. // 2010
This paper presents an approach, which combines structural and dynamical models to form a unified system model. Thereby, both dynamical and structural complexity can be analysed simultaneously. ...
Communication Paths in Biomimetic Design – Supporting a Model-Based Interdisciplinary Information Transfer
Schenkl, Sebastian; Kissel, Maximilian; Hepperle, Clemens; Lindemann, Udo // 2010
A challenge of the development of biomimetic products is the interdisciplinary collaboration of engineers and biologists. Differences in terminologies, representations of knowledge and their ...
Communicative affordance of industrial design sketching
Razzaghi, Mohammad; Nouri, Mobina // 2010
Design sketching, as a key designing technique and a rapid visual demonstration of design thinking, reasoning, and exploration, is being vastly utilized by industrial designers to communicate ...
Comparing Matrix-Based and Graph-Based Representations forProduct Design
Tilstra, A.H.; Campbell, M.I.; Wood, K.L.; Seepersad, C.C. // 2010
Modern design problems can be supported with the use of product representations that go beyond geometrical models. Common product representation models can be generally classified as being ...
Comparison of Predictive Data Mining Methods for their Application in a Design Process
Röhner, Sebastian; Donhauser, Maximilian; Wartzack, Sandro // 2010
A design process is characterized by acquisition and processing of information or knowledge, respectively. The acquisition of information and knowledge can be direct, indirect or automatic. This ...
COMPATIBILITY MATRIX METHODOLOGY APPLIED TO THE IDENTIFICATION OF VEHICLE ARCHITECTURES AND DESIGN REQUIREMENTS
Gorbea, C.; Hellenbrand, D.; Srivastava, T.; Biedermann, W.; Lindemann, U. // 2010
A compatibility matrix is an nxn matrix that is used to identify partial solutions that are compatible within a given choice set. This paper presents a four step methodology that is applied to find ...
COMPREHENSIVE USE OF A DSM-BASED METHODOLOGY IN AN ACADEMIC SETTING
Platanitis, G.; Pop-Iliev, R.; Barari, A. // 2010
The process dynamics of a 3rd year design project are analyzed using DSM methodologies. First, the stability characteristics are determined. Then a sensitivity analysis is performed to compare ...
COMPUTER-AIDED CROSS-DOMAIN MODELING OF MECHATRONIC SYSTEMS
Gausemeier, J.; Dorociak, R.; Pook, S.; Nyßen, A.; Terfloth, A. // 2010
Mechatronics – the symbiotic cooperation of mechanics, electrics/electronics, control engineering and software engineering – opens up fascinating perspectives for the development of future products. ...
Concept for the Architecture of a Self-Learning Engineering Assistance System
Röhner, Sebastian; Gruber, Georg; Wartzack, Sandro // 2010
Considerable efforts have been taken in the past decades to integrate design and manufacturing knowledge into the product development process. A common approach is to offer designers the support of ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.