Query returned 11501 results.
A METHODOLOGY FOR DESIGNING A RECOMMENDER SYSTEM BASED ON CUSTOMER PREFERENCES
Jomaa, Inčs; Poirson, Emilie; Da Cunha, Catherine; Petiot, Jean-François // 2011
This paper presents a contribution to design an online preference based system. The objective of the system is to assist a customer in the products selection process. Current e-commerce ...
A METHODOLOGY FOR DISCOVERING STRUCTURE IN DESIGN DATABASES
Fu, Katherine; Cagan, Jonathan; Kotovsky, Kenneth // 2011
Design by analogy, in which designers draw inspiration from cross-domain design solutions, is a promising methodology for product development. This work attempts to leverage the existing design ...
A METHODOLOGY TO EVALUATE THE STRUCTURAL ROBUSTNESS OF PRODUCT CONCEPTS
Kissel, Maximilian; Hellenbrand, David; Lindemann, Udo // 2011
The success of a company is sustainably dependent on the robustness of their products. Product concept should be designed adaptable for initiated changes but resistant against unforeseen changes. But ...
A METRIC TO REPRESENT THE EVOLUTION OF CAD/ANALYSIS MODELS IN COLLABORATIVE DESIGN.
Drémont, Nicolas; Graignic, Pascal; Troussier, Nadčge; Whitfield, Robert Ian; Duffy, Alex // 2011
Design process is dynamic and uses an important number of models during its progress. CAD (Computer Aided Design) models and CAE (Computer Aided Engineering) are used during design and an important ...
A Model for Visualizing Mechanical Assembly Situations
N .,Madhusudananand ;Chakrabarti, Amaresh // 2011
In order to acquire and use expert knowledge about potential issues in an assembly, knowledge based systems are utilized. To automate the process of acquisition of assembly knowledge from experts and ...
A More Flexible Way of Modeling Structure With Multiple Domains
Kortler, K.; Helms, B.; Shea, K.; Lindemann, U. // 2011
During the planning and development process of innovative products diverse changes of the product architecture occur. Changes are often discovered in the late phases of the product development ...
A MORPHOLOGICAL APPROACH TO BUSINESS MODEL CREATION USING CASE-BASED REASONING
Lee, Ji Hwan; Hong, Yoo S. // 2011
This study aims to provide a structured methodology for a business model creation. Based on a morphological analysis of business model, we propose the methodological chart named as business model ...
A NEW APPROACH TO MODULARITY IN PRODUCT DEVELOPMENT – UTILISING ASSEMBLY SEQUENCE KNOWLEDGE
Robert, Aurélie; Yan, Xiu Tian; Roth, Sébastien; Deschinkel, Karine; Gomes, Samuel // 2011
This article describes an approach dedicated to routine design of “highly productive” modular product ranges incorporating principles of functional analysis, Design For Assembly (DFA), and techniques ...
A New Approach to Wearable Systems: Biodesign Beyond the Boundaries
Ferraro,Venere;Canina, Marita // 2011
This paper presents a design framework for wearable systems. The research is focused on the development of a new design method aimed at the design of wearables. The objective is to use designer’s ...
A NEW FRAMEWORK OF STUDYING THE COGNITIVE MODEL OF CREATIVE DESIGN
Sun, Ganyun; Yao, Shengji // 2011
This paper proposes a new framework of studying the cognitive model of creative design. In this paper, first the general cognitive process of creativity is reviewed, and then current studies of the ...
A NEW METAMODEL TO REPRESENT TOPOLOGIC KNOWLEDGE IN ARTIFACTUAL DESIGN
Jauregui-Becker, Juan M.; Gebauer, Klaas Jan W.; van Houten, Fred J.A.M. // 2011
This paper presents the Topology Abstraction Representation Diagram (TARD) as a new metamodel to represent knowledge about components and their relations for the purpose of Computational Design ...
A NOTE ON THE DEBATE ON SCIENTIFIC PROCESS VS. DESIGN PROCESS
Motte, Damien; Bjärnemo, Robert // 2011
It has often been mentioned that the scientific process is quite opposite to the design process, mainly consisting in the analysis of existing phenomena in order to develop a theory, the design ...
A NOVEL HYBRID 2D AND 3D AUGMENTED REALITY BASED METHOD FOR GEOMETRIC PRODUCT DEVELOPMENT
Prieto, Pablo Andrés // 2011
A method that uses the interaction of two and three dimensional environments to carry out the geometric modeling and refinement steps of the product development process is presented. The 2D ...
A Novel Softer and More Creative Approach for Materials Selection while Incorporating Emotional Aspects
Koohgilani, Mehran; Khan, Zulfiqar; Parkinson, Brian // 2011
The concept of material selection and its importance has widely been investigated and its significance in the proper design and technology has also well proven. It is also clear that to fully ...
A PARAMETRIC DESIGN FRAMEWORK TO SUPPORT STRUCTURAL AND FUNCTIONAL MODELING OF COMPLEX CONSUMER ELECTRONICS PRODUCTS
Seki, Kenichi; Nishimura, Hidekazu; Zhu, Shaopeng; Balmelli, Laurent // 2011
Today's market demand for smaller and more powerful consumer electronic devices poses a major challenge to the rapid design of products. In addition, the ability to perform strategic ...
A PROCESS OF CONCEPTUAL ENGINEERING DESIGN FOR NEW PATENTABLE PRODUCTS
Lloveras, Joaquim // 2011
The conceptual design phase is a few-structured phase, and it is especially true for to create a new product that can be patented. In this paper is proposed a procedure to do a conceptual design ...
A PROPOSAL FOR AN ASSESSMENT FORM FOR ENGINEERING DESIGN THESES
Watty, Robert; Kreimeyer, Matthias // 2011
To evaluate a student’s work best possible, the assessment of theses written as part of the curriculum has to meet certain standards from both an academic and an industrial perspective to fully ...
A Proposal For an Augmented DSM to Assess Product Sustainability
Rocco, C.; De Napoli, L.; Rizzuti, S. // 2011
The paper proposes an extension of the Design Structure Matrix to support designers in a rough sustainability evaluation of an industrial device in the early stage of its development.
The ...
A PROTOCOL FOR CONNECTIVE COMPLEXITY TRACKING IN THE ENGINEERING DESIGN PROCESS
Mathieson, James; Miller, Michael; Summers, Joshua // 2011
The evaluation of design processes is often conducted after the process has been completed or as a case study on a single process. These two approaches each cannot be used to improve an ongoing ...
A Review of Open ICT Tools for Collaborative Teaching & Learning
Bohemia, Erik; Turnock, Chris // 2011
The Open ICT Tools project explored the use of open source Web 2.0 applications to facilitate collaboration between School of Design at Northumbria University and its international business and ...
A SCALABLE APPROACH FOR THE INTEGRATION OF LARGE KNOWLEDGE REPOSITORIES IN THE BIOLOGICALLY-INSPIRED DESIGN PROCESS
Vandevenne, Dennis; Verhaegen, Paul-Armand; Dewulf, Simon; Duflou, Joost R. // 2011
Many applications of Biologically-Inspired Design (BID) are well-known and research is increasingly focusing on methodologies towards systematic BID. However, currently no ideation tool exists that ...
A Service Approach to Course Development
Watt, Cameron; Ely, Philip; Chapman, Damian // 2011
Like many other organizations in both the private and public sectors Higher Education (HE) Institutions are facing challenging and traumatic times as the UK becomes further and mired in the worst ...
A SOUND-BASED PROTOCOL TO STUDY THE EMOTIONS ELICITED BY PRODUCT APPEARANCE
LU, Weihua; PETIOT, Jef // 2011
Emotions influence how a customer interacts with the product. To be able to instill emotional value in product design, the understanding of user emotion and the measure of emotions are interesting ...
A STRUCTURE FOR REPRESENTING PROBLEM FORMULATION IN DESIGN
Dinar, Mahmoud; Shah, Jami J.; Langley, Pat; Hunt, Glen R.; Campana, Ellen // 2011
Much study has been done on the process of design and problem formulation is believed to play a major role in a creative design of high quality. Yet, it has gained less attention. We propose a ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.