Query returned 11501 results.
Notwendigkeit von detaillierteren FE-Modellen zur Effizienzsteigerung der Produktion von Flugzeugk (Members only )
Wohlgemuth, Martin; Spielberger, Patrick; Seemann, Ralf // 2013
Obstacles and development of support for translation of configuration rules
Tidstam, Anna; Malmqvist, Johan // 2013
Collaborative product development is a method for reducing costs, but there is a risk of severe obstacles during the product documentation exchange. Product documentation for configurable products ...
On design concept validation through prototyping: Challenges and opportunities
Arastehfar, Soheil; Liu, Ying; Lu, Wen Feng // 2013
Prototyping is widely used as a means to illustrate and exemplify design requirements and intents and interact with designers and users. This paper aims to review the role and function of prototyping ...
On products shapes and personalities
Prieto, Pablo Andrés; Fantoni, Gualtiero; Campolmi, Riccardo // 2013
In this paper, preliminary results of the first stage of a long-term research that aims at systematizing the task of product design with an intended personality are reported. A survey was conducted ...
On the co-existance of FBS and TRIZ for simplifying design process in an iterative way
Russo, Davide; Spreafico, Christian; Duci, Stefano // 2013
Functional design model and in particular FBS model are, in recent years, most commonly accepted design theories to support design process. However, with regard to their use it remains widespread ...
On the effectiveness of experimenting with C-K theory in design education: Analysis of process methodology, results and main lessons drawn
Blanchard, Philippe Michel; Corsi, Patrick; Christofol, Hervé; Richir, Simon // 2013
This paper experiments a transdisciplinary design innovation way in educational contexts through workshops implementing a C-K Theory-based co-evolution between Concepts and Knowledge spaces. At ...
Open innovation and idea generation in SMEs
Aschehoug, Silje Helene; Ringen, Geir // 2013
Previous research in the field of open innovation is dominated by research on large and multinational corporations, research in the software industry, and in the consumer goods sector. However, few ...
Operationalisation of the value analysis for design for lightweight: The function mass analysis
Posner, Benedikt; Binz, Hansgeorg; Roth, Daniel // 2013
The mass has a great influence on the value of products from different industries. For example, by reducing the mass of a product, the energy consumption and CO2 emissions can be reduced. These ...
Operationalization of the quadrant-based validation in case of a designerly software development methodology
Du Bois, Els; Horvath, Imre // 2013
Systematic validation of design methods is important to advance the professional practice of engineering design. In contrast, we lack structured approaches for validation of design methodologies. In ...
Optimierung von Bauteilen auf Basis von Produktnutzungsinformationen (Members only )
Sauthoff, Bastian; Lachmayer, Roland // 2013
Out of the lecture and into the studio: a new take on teaching design history
Howell, Bryan; Christensen, Kimberly // 2013
Studio-based instructional models have been a central landmark of architecture and design education for nearly 100 years. However, studio models are typically found only in courses teaching design ...
Overcoming design fixation through education and creativity methods
Howard, Thomas J.; Maier, Anja M.; Onarheim, Balder; Friis-Olivarius, Morten // 2013
This paper reports an experiment on the topic design fixation using 12 teams of masters students working on three design problems from (Jansson and Smith 1991). The objective of the experiment is to ...
Overview of methods supporting product planning: Open research issues
Bacciotti, Daniele; Borgianni, Yuri; Rotini, Federico // 2013
The capability to innovate and thus to renew the commercial offer, is becoming the mission of several companies in order to dramatically increase the customer satisfaction. To this aim, the design ...
People, place, process: Lessons learnt on the path to a d.school
Hillen, Véronique B; Levy, Pierre // 2013
Since 2006, Design Thinking education programs for master-level students have been developed at Ponts ParisTech, a leading French engineering school. This paper presents a longitudinal study of the ...
Perception of aesthetics in consumer products
Pérez Mata, Marta; Ahmed-Kristensen, Saeema; Yanagisawa, Hideyoshi // 2013
In today´s highly saturated consumer markets, competition among products is high. Emotional design, kansei engineering and aesthetics are tools increasingly used to make products stand out from their ...
Performance measurement framework for multi-role aircraft under performance based logistics
Lee, Chang Ha; Min, Gwang Ki; Kiritharan, Mayooran; Hong, Yoo S. // 2013
Under Performance Based Logistics (PBL), the vendor of weapon system is paid for their after-sales service based on the outcome of performance; therefore, it is very important to establish the way to ...
Performance measurement in global product development
Taylor, Thomas Paul; Kristensen, Saeema Ahmed // 2013
An organisation looking to form collaborations across borders is a consequence of an increasingly competitive world market. Recent studies highlighted key challenges and success factors ...
Performance Measurement supporting Closed Loop Tolerance Engineering – an industrial case on tolerance and variation collaboration
Krogstie, Lars; Andersen, Bjørn; Verberne, C.J. // 2013
Tolerances and Variation are interlinked and omnipresent throughout any engineering organization dealing with design and manufacturing of physical artefacts, but is disproportionally visible in ...
Personality bias in user centred design
Roos, John Magnus; Nilsson, Thomas; Wheatley, Ellen // 2013
Personality theorists divide people along traits as extraversion, agreeableness, conscientiousness, emotional stability and openness. The present study investigates to what degree personality traits ...
Perspectives in competencies-based education: a curricular experience to form a new industrial design profile
Mejia, Luis; Betancourt, Maria Clara // 2013
There is an evident gap between the quality of the design graduates and what future employers want them to do, it is understood that there is a difference between what they learn in school and what ...
Pflege modularer Produktfamilien nach dem Markteintritt durch die Produktentwicklung (Members only )
Bahns, Tammo; Krause, Dieter // 2013
Playful conceptual design of industrial product service systems: An experiment
Meuris, Daniel; Herzog, Michael; Köster, Matthias; Sadek, Tim // 2013
It is known well that the development of industrial product-service systems (IPS2) is a challenging task for solution providers. In order to enable the full potential of these new systems the ...
PLM support for development of modular product families
Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik; Harlou, Ulf // 2013
Most modern manufacturing companies use a PLM/PDM system for documenting and managing product data. Companies use their PLM/PDM system for management of CAD files, documents, and drawings, but they ...
Potentials for realising a consistent transition between functional modelling with the IFM framework and early system simulation
Eisenbart, Boris; Dohr, Fabio; Gericke, Kilian; Vielhaber, Michael; Blessing, Lucienne // 2013
Conceptual design is considered one of the most demanding design tasks requiring a joint effort of the involved designers, particularly in interdisciplinary design. Sound decision-making across ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.