Query returned 11501 results.
SUPPORTING INDUSTRIAL EQUIPMENT DEVELOPMENT THROUGH A SET OF DESIGN-FOR-MAINTENANCE GUIDELINES
Mulder ,W.; Basten, R.J.I.; Jauregui Becker, J.M.; Blok ,J.; Hoekstra, S.; Kokkeler, F.G.M. // 2014
This paper presents a leaflet with design-for-maintenance guidelines. It aims at supporting developers of industrial equipment in their design-for-maintenance practices. The use of this leaflet ...
SUPPORTING LIGHTWEIGHT DESIGN POTENTIAL ASSESSMENT IN THE CONCEPTUAL PHASE
Posner ,B.; Binz, H.; Roth, D. // 2014
In this contribution a method is presented, which supports designers in systematically analysing existing components of solutions and uses these results to estimate which working principle, ...
SUPPORTING THE CHOICE OF DESIGN ALTERNATIVES UNDERLYING INCREMENTAL AND RADICAL INNOVATIONS
Borgianni ,Y.; Rotini, F. // 2014
Decision making during the initial design stages result particularly crucial because of the relevance of the Fuzzy Front End in light of achieving successful product development projects. The ...
Supporting the Development of Lightweight Design Structures with Simple Methods in Early Stages
Posner, Benedikt; Binz, Hansgeorg; Roth, Daniel // 2014
Mattheck [1] presents very simple methods for developing lightweight design structures based on bionic ideas. These methods can already be used to develop structures on a very low level of detail. ...
Supporting the Early Stages of the Product Design Process: Using an Integrated Collaborative Environment
Malins (1), Julian; Liapis (2), Aggelos; Kantorovitch (3), Julia; Markopoulous (4), Panos; Laing (1), Richard; Didaskalou (5), Alexandros; Coninx (6), Karin; Maciver (1), Fiona // 2014
Existing technologies designed to support professional product designers focus mainly on the modelling stages of the design process, while the early conceptual stages remain relatively unexplored. ...
SUPPORTING THE MODELING OF TRACEABILITY INFORMATION
Koehler, N.; Naumann, T.; Vajna, S. // 2014
the modeling of mechatronic systems was developed at Daimler’s research department. This paper analyzes the prototype's functionalities qualitatively and quantitatively. The analyses confirm the ...
Supporting the STEM Transition between School and University
Thomson, Avril; Sayer, Phillip; McLaren, Andrew; Little, Derek // 2014
This paper sets out to review the relationship between Schools and Universities in the West of Scotland with the strategic aim of widening access to STEM (Science, Technology, Engineering and ...
Sustainable Design Technology: A Case Study of a Master Student’s Lamp Project
Berg, Arild; Stoltenberg, Einar; Reitan, Janne // 2014
Creatively treated materials from nature transform, through technological processes and design practice, into cultural objects containing function and meaning. Views on nature, culture, and ...
SUSTAINABLE PRODUCT-SERVICE DESIGN IN MANUFACTURING INDUSTRY
Peruzzini, M.; Marilungo, E.; Germani ,M. // 2014
The interest of manufacturing enterprises in Product-Service systems (PSS) is growing to achieve new strategic advantages and greater earnings. However, companies still adopt product-centred design ...
SYMBOLIC INTERACTIONS AS INSPIRATIONS
Lai ,M.T. // 2014
Designing interactions for products and services, interaction designers often look for inspiration from microinteractions and user interfaces. The sociological perspective of symbolic interactionism ...
SYSTEMATIC DETERMINATION OF SECONDARY WEIGHT IMPROVEMENTS
Luedeke ,T.; Meiser, P.; Vielhaber, M. // 2014
Weight optimization methods are a key approach of sustainable product engineering. Nevertheless, they may lead to unforeseeable secondary effects in multi-dimensional optimization steps. Especially, ...
SYSTEMATIZATION OF BEST PRACTICES FOR ECODESIGN IMPLEMENTATION
Pigosso, D.C.A.; McAloone, T.C.; Rozenfeld ,H. // 2014
Despite the recognition of ecodesign potential benefits, its application has not reached companies over the last decades mainly due to difficulties in ecodesign implementation and management and lack ...
Systems Engineering Design Education based on Multidisciplinary and Global Project based Learning
Inoue, Masahiro; Hasegawa , Hirosih; Mano, Kazunori; Furukawa, Yoshimi; Yamazaki, Atsuko; Aank , Khantachawana; Tachibana , Masahiko // 2014
We developed systems engineering design education program based on multidisciplinary and Global Project Based Learning (PBL). We also implemented the global PBL as a joint program of Shibaura ...
TAILORING RISK MANAGEMENT APPROACH FOR THE PRODUCT DEVELOPMENT ENVIRONMENT
Škec, S.; Štorga ,M.; Rohde ,D.; Marjanovic ,D. // 2014
The paper presents overview of the risk management practices and bridges different approaches for coping with risk issues within the product development (PD) environment. Existing risk management ...
Task Dependency Risk Visualisation using DSMs (Members only )
Minogue, P. // 2014
Where task dependencies are sufficiently complex, process-architecture or task-based Design Structure Matrices (DSMs) can be used to visualize, analyse and optimize those dependencies. Traditionally, ...
TASK-DEPENDENT VISUAL BEHAVIOUR OF ENGINEERING DESIGNERS - AN EYE TRACKING EXPERIMENT
Lohmeyer ,Q.; Matthiesen ,S.; Meboldt ,M. // 2014
The paper presents an eye tracking experiment transferring the research approach of investigating the dependency of different tasks on visual behaviour into the context of engineering design. In ...
Taxonomy of Procedures and Design Framework to Enable Flexibility in Engineering Systems
Cardin, Michel-Alexandre // 2014
This paper presents a five-phase taxonomy capturing a set of systematic procedures to enable flexibility in the design and management of engineering systems operating under uncertainty. The taxonomy ...
Teaching Cross-Disciplinary Collaboration in Design Projects with Engineering and Medical Students
Fox, Stephan; Kurtcuoglu, Vartan; Meboldt, Mirko // 2014
In order to meet the med-tech community’s high demand for innovation, the educational, cultural and communication gaps between medical doctors and design engineers need to be narrowed. Effective and ...
Teaching Design Engineering in an Interdisciplinary Programme
Wits, Wessel; Homminga, Jasper; Endedijk, Maaike; Visscher, Klaasjan; Krab-H, Leonie // 2014
ATLAS, the Academy of Technology and Liberal Arts & Sciences, is an interdisciplinary three-year Bachelor of Science honours programme for talented students that opened its doors in September 2013. ...
Teaching Digital Technologies in Industrial/Product Design Courses in Portugal
Dias, Ana Cristina; Almendra, Rita Assoreira; da Silva, Fernando Moreira // 2014
In full 21st century and living in a digital age, technology advancements have led to the development and use of digital media for product design projects’ support. It starts with education and ...
Teaching Ethics in Engineering and Design, the Necessity of Concurrent Engineering.
Gonz, Carlos Alberto // 2014
Mechatronics engineering is a discipline, which links together three different areas: mechanics, electronics and digital systems. This major, has proven its use in industry, it allows them to have ...
Technology and Interaction in the Realm of Social Design: Role, Influence and Value
In // 2014
Social design is the most commonly used term to identify an emergent design area that applies its process, thinking, skills and tools to answer complex social problems. Its practices, methods and ...
Test Results of Practical Value-Centric Business Development Methodology
Randmaa, Merili; Otto, Tauno; Howard, Thomas J. // 2014
Design and the creativity and innovation involved in it are “living things moving in a field.” By limiting their movements, they may be described with greater accuracy, but their natural movements ...
THE AESTHETICS OF PROSTHETIC DESIGN: FROM THEORY TO PRACTICE
Sansoni, S.; Wodehouse ,A.J.; Buis, A. // 2014
Aesthetics of prosthetic devices is an emerging academic field, concerned with the visual attraction of a particularly intimate category of medical device. Our belief is that prosthetic users can ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.