Query returned 11238 results.
Healthcloud - Participatory design of user interfaces for senior people’s active aging
Normark, Jörgen; Wikberg-Nilsson, Åsa; Björklund, Cecilia; Wiklund-Axelsson, Sari-Anne // 2018
The aim of the interdisciplinary HealthCloud pre-study project was twofold: to further knowledge of user experiences of inclusive interface design specifically for an ageing population, and to ...
HEGEMONY IN INDUSTRIAL DESIGN: A STUDY OF GENDERED COMMUNICATION STYLES
Walters, Kellie Kay // 2018
The field of industrial design is heavily male dominated, with only 19% female representation in professional practice; meanwhile, academic programmes are reaching equal numbers of men and women. ...
HOW DO C&C²-MODELS IMPROVE EFFICIENCY, COMPREHENSIBILITY AND SCOPE IN FAILURE ANALYSIS - AN EMPIRICAL STUDY BASED ON TWO LIVE-LABS
Gladysz, Bartosz; Albers, Albert // 2018
In this article, the authors evaluate a newly-developed method, which is based on the Contact and Channel Approach (C&C²-A) and uses models integrating embodiment design and functions for supporting ...
How do C&C²-models improve the understanding of system behaviour in failure analysis?
Gladysz, Bartosz; Megner, Tino; Mayer, Marcel; Albers, Albert // 2018
In previous publications a new approach has been introduced based on the Contact and Channel Approach (C&C²-A),which integrates embodiment design with cause and effect relations in one model. ...
HOW MOOD FOSTERS CREATIVITY IN PRODUCT DESIGN? EXPERIMENTAL EVIDENCES ON HUMOUR IMPACT DURING A CONCEPTUAL DESIGN SESSION IN A MASTER DEGREE CLASS
De Napoli, Luigi; Rizzuti, Sergio; Raco, Alessandro // 2018
Humour may improve performance in creative problem solving as demonstrated in various studies, although the mechanisms underlying this phenomenon are still unclear. In this work the mechanisms of how ...
HOW MUCH KNOWLEDGE MANAGEMENT IS HIDDEN IN DESIGN METHODS?
Laukemann, Alexander; Roth, Daniel; Binz, Hansgeorg // 2018
The focus of this paper is to provide a beneficial insight into knowledge-management-specific analysis of the design activities involved in design methods. Therefore the objective is to present an ...
HOW TO DESIGN METHODS FOR APPLICATION - EMPIRICAL INSIGHTS FROM INDUSTRY
Guertler, Matthias R. // 2018
Methods support designers in systematically developing new or improving products and processes. Despite their benefits, the use of methods in industry is still limited. Methods are often perceived as ...
HOW TO FOSTER INNOVATION? FINDINGS AND HYPOTHESES FOR COLLABORATIONS BETWEEN RESEARCH AND INDUSTRY
Şahin, Tarık; Cudok, Anja; Rapp, Simon; Inkermann, David; Albers, Albert; Wattenberg, Friedrich; Bursac, Nikola; Vietor, Thomas // 2018
This paper stresses the importance of collaborations to foster innovation and highlights the need for a shared understanding of innovation. To support successful collaboration we outline essential ...
HOW TO SELECT APPROPRIATE STIMULATION MECHANISMS TO PERFORM AN ECO-IDEATION SESSION?
Tyl, Benjamin; Vallet, Flore; Pialot, Olivier // 2018
The generation of eco-innovative ideas requires the development of specific heuristics or stimuli. If several types of heuristics have been elaborated in innovation -and eco-innovation-, the ...
HOW TO WITNESS DESIGN
Freimane, Aija // 2018
Design adds value for the benefit of the economy, people and the environment; however, reliable and comparable tools demonstrating design’s contribution to the economy and its impact on return on ...
HUMAN CENTRICITY IN INTEGRATED DESIGN ENGINEERING
Urakami, Jacqueline; Vajna, Sándor // 2018
Integrated Design Engineering is a holistic approach to create products of any kind. These are created in a human-centred way, as interests, issues, and needs of people involved in any product life ...
IDEA GENERATION CHALLENGES IN DIGITAL FABRICATION
Georgi V. Georgiev, Iván Sánchez Milara // 2018
Digital fabrication is an educational and activity paradigm in which multidisciplinary knowledge, hands-on skills, and teamwork among the makers are essential for success. One of the most significant ...
IDEAL IDEATION: A FRAMEWORK FOR THE MANAGEMENT OF SKETCH INHIBITION AMONG UNDERGRADUATE DESIGNERS
Thurlow, Lisa; Ford, Peter // 2018
Sketch inhibition among undergraduates is a growing but under-researched issue. Affected students avoid engaging with sketching during concept development, they also have little understanding of the ...
Identification of haptic exploration procedures over textile surfaces with a Leap Motion Controller
Gussen, Lars C.; Ellerich, Max; Schmitt, Robert H. // 2018
The development of high-quality products, which simultaneously address the customer’s needs, is a key challenge for companies nowadays. Besides features and technology a customer assesses a product ...
IDENTIFYING DISRUPTIVE TECHNOLOGIES: HORIZON SCANNING IN THE EARLY STAGES OF DESIGN
Ernstsen, Sidsel Katrine; Thuesen, Christian; Larsen, Laurids Rolighed; Maier, Anja // 2018
Technology development is accelerating, driving disruption. Design is seen as key differentiator in creating innovative offerings but few design methods consider future technologies explicitly. In ...
Identifying Expedient Variations in PGE – Product Generation Engineering
Rapp, Simon; Moeser, Georg; Eichhorn, Philipp; Albers, Albert // 2018
Product development can be described as PGE –Product Generation Engineering: A new product is developed based on at least one existing reference product. For the development of the new product ...
IMPACT OF DESIGN BRIEFS ON CREATIVE OUTCOMES: A FACTORIAL STUDY ON STUDENT DESIGNERS' CREATIVITY
Koronis, Georgios; Silva, Arlindo; Kang, Jacob; Chia, Pei Zhi // 2018
Our study focuses on understanding how design briefs affect the creativity of design outcomes by student designers. The stimuli contained in design briefs have the potential to either encourage ...
IMPACT ON DESIGN WHEN INTRODUCING ADDITIVE MANUFACTURING IN SPACE APPLICATIONS
Borgue, Olivia; Panarotto, Massimo; Isaksson, Ola // 2018
This paper studied how the introduction of additive manufacturing (AM) in space applications impacts the design phases. Together with three manufacturers of space applications, the potential benefit ...
IMPACTS ON DESIGN SELF-EFFICACY FOR STUDENTS CHOOSING TO PARTICIPATE IN A UNIVERSITY MAKERSPACE
Ethan Hilton, Megan Tomko, Alexander Murphy, Robert Nagal, Julie Linsey // 2018
Engineering design courses can take advantage of makerspaces on university campuses. Makerspaces are built with a diverse set of equipment thought to inspire creativity and design confidence among ...
IMPLEMENTATION OF SYSTEMS MODELING LANGUAGE (SYSML) IN CONSIDERATION OF THE CONSENS APPROACH
Salehi, Vahid; Florian, Gross; Taha, Jihad // 2018
The following paper, which is based on the design research methodology (DRM) according to Blessing and Chakrabarti, will first make a literature survey related to MBSE approaches in general. Based on ...
IMPLEMENTING PLM BY USING A PDM-SYSTEM IN UNIVERSITY EDUCATION - EVALUATING 3 YEARS OF TEACHING
Dittmann, Claudia; Jacobs, Georg; Katzwinkel, Tim; Konrad, Christian; Sulejmani, Fatmir; Weigel, Chantal; van Issum, Daniel // 2018
The future generation of mechanical engineers has to meet a broad range of exigencies concerning their skills. Today’s product development processes are becoming more complex. The requirements of ...
IMPROVED METHODS FOR TEACHING PRODUCT FORM DESIGN TO ENGINEERING STUDENTS
Dresselhaus, William F; Yim, Hyunjune {HJ}; Lee, Keun // 2018
This paper presents the results of an ongoing experimental “Designeer” programme of teaching end-user product design to undergraduate engineering students using a hybrid approach of traditional ...
IMPROVEMENT OPPORTUNITIES FOR THE COLLABORATION OF DESIGN AND SIMULATION DEPARTMENTS - AN INTERVIEW STUDY
Schweigert-Recksiek, Sebastian; Lindemann, Udo // 2018
As mechanical simulations of products play an increasingly important role in design processes, improving the collaboration of design and simulation departments has come into focus. In order to ...
In search of lost materiality; The case of digital modelling in Industrial Design Engineering
Ekströmer, Philip; Wever, Renee // 2018
Over the recent years, Industrial Design Engineering students at Linköping University have frequently been observed to go directly from sketches into CAD, without making simple sketch models for ...
Boolean Searches
The following examples demonstrate some search strings that use boolean operators:
- design community
Find rows that contain at least one of the two words. - +design +community
Find rows that contain both words. - +design community
Find rows that contain the word “design”, but rank rows higher if they also contain “community”. - +design -community
Find rows that contain the word “design” but not “community”. - +design ~community
Find rows that contain the word “design”, but if the row also contains the word “community”, rate it lower than if row does not. - +design +(>community <decisions)
Find rows that contain the words “design” and “community”, or “design” and “decisions” (in any order), but rank “design community” higher than “design decisions” - design*
Find rows that contain words such as “design”, “designs”, “designing”, or “designer”. - "some words"
Find rows that contain the exact phrase “some words” (for example, rows that contain “some words of wisdom” but not “some noise words”). Note that the " characters that enclose the phrase are operator characters that delimit the phrase. They are not the quotation marks that enclose the search string itself.